Air Inflation Pedal; Moving Parts; Inflator And Pressure Limiter - Hunter TCX50H Series Operation Manual

Table of Contents

1.13 Air Inflation Pedal

On the left side of the base, the air inflation pedal operates the two-stage air inflation system.

Refer to illustrations on page 27. The pedal controls the air going to the inflation hose and

the air inflation jets.

Keep hands clear of wheel during sealing and seating of beads.

Risk of Tire Failure When Driving.

Excessive air pressure can damage the internal structure of a tire, without this

damage being visible to you, resulting in an automobile accident, personal injury or

death.

As a safety device, the pressure limiter prevents the operator from using excessive air

pressure.

Bead seating pressure should never exceed the tire manufacturer's maximum bead seating

pressure as stated on the sidewall of the tire.

If tires being mounted require more than the tire manufacturer's maximum bead seating

pressure, the wheel should be removed from the tire changer, placed in an inflation cage, and

inflated per manufacturer's instructions.

Operation Instructions for TCX50H Tire Charger

DANGER

• EXPLOSION HAZARD

• Never exceed tire pressure recommended by

tire manufacturer. Never mismatch tire size

and rim size.

• Avoid personal injury or death.

WARNING

• MOVING PARTS PRESENT.

MOVING PARTS CAN CUT AND CRUSH.

• Keep hands away from moving parts.

• Crush may cause injury.

Table of Contents