Hunter TCX575 Operation Instructions Manual page 37

Operation Instructions for TCX575 Tire Changer
Step down on the bead breaker shovel pedal
The bead breaker arm will be pulled toward the tire changer to loosen the bead.
Release the pedal to disengage the bead breaker arm and then swing the arm to the
open position.
If the bead has not been completely loosened, rotate the wheel 180 degrees and
repeat the bead breaking procedure.
Turn the wheel and loosen the opposite bead using the same procedure.
NOTE: Do not attempt to use the BPS Device for bead breaking. It
is only to be used to loosen beads that have already been
loosened with the side shovel.
.
3. Advanced Procedures  29