Hunter TCX575 Operation Instructions Manual page 24

16  2. Basic Procedures
Press the wheel rotation pedal
demount the upper bead.
Some of the more difficult tires may not allow for proper insertion of the automatic
bead lever because not enough of a gap can be created between the tire and the rim
edge.
If this is the case, reposition the upper BPS disc as shown below. Lower the upper
BPS disc and push down to create a gap between the tire and the rim edge (A), then
insert the automatic bead lever (B).
to rotate the wheel clockwise and fully
AT THIS POINT
AUTOMATIC
BEAD LEVER
Operation Instructions for TCX575 Tire Changer
NOT ENOUGH
GAP BETWEEN
TIRE AND RIM
EDGE
(A)
PUSH DOWN
(B)
INSERT