Collecting Data
• • • • • •
This chapter provides general information about recording data, downloading it, and removing files to free up internal memory.
Setting Recording Parameters
The Topcon Receiver Utility (TRU) software enables you to set logging parameters, such as logging rate and types of messages, in
which to record data. This software and the TRU Reference Manual is supplied on the HiPer SR CD. See the TRU Reference Manual
for more information. The HiPer SR is compatible with any Topcon field software for configuration and recording raw data.
Logging Rates
The receiver provides up to 2 GB of file space on the internal (non‐removable) memory card. The amount of memory used to log
data depends on the logging rate. For more information about setting logging rate parameters, see the TRU Reference Manual.
Recording Data
You can log raw GNSS data to the receiver's internal memory and use the Topcon Receiver Utility (TRU) or MAGNET Office™
software to download the files to a computer.
To start or stop recording data to the receiver, you can use the LED display panel or TRU.
1. Press the Power button to turn on the receiver.
Collecting Data
P/N: 1000737‐01
54