Field System Setup
• • • • • •
The HiPer SR receiver's advanced design eliminates the need for cables during operation, allowing for a simplified setup and less
parts to keep track of.
You can transmit RTK corrections from the Base to the Rover receiver wirelessly up to 300 meters using LongLINK™ wireless
technology or up to xxx using the cellular networking option. At the same time, you can connect over Bluetooth to a controller
running TRU, MAGNET Field™, MAGNET Relay™ or Pocket‐3D to configure the instrument, and collect and manage data.
This chapter describes the field setup of your new receiver, so it is ready for use as a Rover, Base, network, RTK or for static data
collection.
Field System Setup
Prism Spacer
Tribrach
Adapter
Tribrach
Tripod
Figure 15: Equipment and Setup
P/N: 1000737‐01
Receiver
Range
Pole
47