Loading New Firmware - Topcon HiPer SR Operator's Manual

Loading New Firmware

Receiver board firmware is released as a compressed file that you download and decompress. This file contains the following
two files:
•
ramimage.ldr – the Receiver board RAM file
•
main.ldp – the Receiver board Flash file
To upload firmware files to the receiver:
1. Connect the receiver to a computer using the Power and Serial cable receiver accessory (p/n: 100182‐01).
Only use the Power and Serial cable to upload firmware to the receiver. Using a USB or Bluetooth connection
to upload firmware could damage the receiver. The next firmware release, 4.0 SR, will support USB or
Bluetooth connections for firmware uploads. See www.topcontotalcare.com for firmware updates.
2. Click DeviceApplication ModeFirmware Loading.
Loading New Firmware
P/N: 1000737‐01 32