Pprcopy Estpair Parameters And Examples - HP XP7 User Manual

Parameter
1
ONLINSEC
1. Not specifying and specifying NO for this parameter have the same affect.
2. If you specify NOCOPY as the MODE parameter and YES as the MSGREQ parameter, the CESTPAIR PPRC
command ends before the copy operation is completed.
The following image shows an example of the CESTPAIR PPRC command:

PPRCOPY ESTPAIR parameters and examples

The following table describes the PPRCOPY ESTPAIR PPRCOPY command parameters.
Parameters
DDNAME,
SYSNAME, or
UNITADDRESS
PRI
SEC
MODE
PACE
CRIT
MSGREQ
LSS
92 Business Copy Z pair user tasks using IBM PPRC and ICKDSF
Value
NO
YES
NO
Value
DDNAME = dname = JCL statement identifying
the volume.
SYSNAME = sysxxx = SYSNAME in the ASSGN
system control statement.
UNITADDRESS = ccuu = device number.
Primary volume: SSID, serial number, channel
connection address.
To request an Add and Split, set MSF00
instead of a serial number.
Note: This parameter is valid for MODE(COPY)
or MODE(NOCOPY) only.
To assign a pair to a CG, set MAnn0 instead of
a serial number.
Note: nn is a CTG ID.
Secondary volume: SSID, serial number, channel
connection address.
COPY
NOCOPY
1-255
Not applicable
YES
NO
P-VOL or S-VOL CU number.
Description
for this parameter when an Add and Split is
required, the command is rejected and ends
abnormally (reporting CC = 8).
MSGREQ function is not applicable.
The pair is created whether the S-VOL is online or
not.
If the S-VOL is online, the pair is not created.
Description
Only one of the three parameters can be
specified. The italic term is the arbitrary name.
For example, dname is the arbitrary unique
name of the JCL statement which identifies the
volume.
You must use these parameters to successfully
run the command.
NA
The system recognizes only COPY for the
MODE parameter, even if NOCOPY is
specified.
Copy speed is medium, regardless what is
specified for the PACE parameter.
Not used by BC Z.
To prevent the command from ending
abnormally (reporting CC = 12), do not specify
this parameter if MODE(RESYNC) is set.
MSGREQ function is not applicable.
NA