HP XP7 User Manual page 79

SSB2 code Description
For more information about the required status for each pair task, see
user tasks" (page
2067 Volumes of the specified pair are shared by Cnt Ac-S Z and Cnt Ac-J Z. The reverse resynchronization
was rejected because the Cnt Ac-S Z or Cnt Ac-J Z pair is not split ("Split/SUSPOP" status).
2071 The pair task was rejected because the volume you specified as the P-VOL is the volume for Auto LUN,
and the transfer process could not be interrupted.
Retry the operation after the Auto LUN transfer process has completed.
2078 Because the specified P-VOL was also a Cnt Ac-J Z P-VOL for delta resync, one of the following errors
occurred:
The Reverse Copy was rejected because the Cnt Ac-J Z pair status is not "Split/SUSPOP".
The Quick Restore was rejected.
2079 The pair task was rejected because the specified S-VOL was also a Cnt Ac-J Z P-VOL for delta resync.
2086 The pair task was rejected because the initialization process is being performed.
2089 The Quick Restore was rejected because you are formatting the volume you specified as a P-VOL
using Quick Format.
For more information about formatting volumes using Quick Format, see the HP XP7 Provisioning for
Mainframe Systems User Guide.
208A The Quick Restore was rejected because you are formatting the volume you specified as an S-VOL
using Quick Format.
For more information about formatting volumes using Quick Format, see the HP XP7 Provisioning for
Mainframe Systems User Guide.
208C The pair task was rejected because the volume you specified as the S-VOL is a FICON(R) Data
Migration volume.
2097 The Quick Restore was rejected because of one of the following:
The P-VOL is also a THP V-VOL, but the S-VOL is a normal volume.
The P-VOL is a normal volume, but the S-VOL also a THP V-VOL.
209E The pair task was rejected because the volume you specified as the P-VOL is a Mainframe Fibre Data
Migration volume.
20A2 The create pair task was rejected because the P-VOL is a THP or Smart V-VOL for which the capacity
is increasing.
20A3 The pair was not created because the S-VOL is a THP or Smart V-VOL for which capacity is increasing.
20A9 The pair task was rejected because FS is using the specified CG number.
20AA The create pair task was rejected because the volume you specified as the P-VOL is a THP or Smart
V-VOL and its zero pages were being reclaimed.
20AB The create pair task was rejected because the volume you specified as the S-VOL is a THP or Smart
V-VOL and its zero pages were being reclaimed.
20B0 The pair task was rejected because the volume you specified as the P-VOL is a THP or Smart V-VOL
and its capacity is increasing.
20B1 The pair task was rejected because the volume you specified as the S-VOL is a THP or Smart V-VOL
and its capacity is increasing.
20B4 The pair task was rejected because the volume you specified as the P-VOL is a THP or Smart V-VOL,
which is not associated with a pool.
20B5 The pair task was rejected because the volume you specified as the S-VOL is a THP or Smart V-VOL,
which is not associated with a pool.
67).
Locating and interpreting error codes and logs using the RAID Manager or BCM
"Pair status and supported pair
79