Cquery Tso Parameters And Examples; Query Ickdsf Parameters And Examples - HP XP7 User Manual

CQUERY TSO parameters and examples

The following table shows CQUERY TSO PPRC command parameters used to show pair information.
Parameter
DEVN
The following image shows an example of running the CQUERY TSO PPRC command:
If you run the CQUERY TSO PPRC command to the S-VOL in a CG, the output for the SECONDARY
serial number is shown in the following format:
00|S|@|000|30158
where:
S indicates that it is assigned to a CG.
@ indicates CG pair-split.
30158 is the serial number.

QUERY ICKDSF parameters and examples

The following table shows the QUERY ICKDSF command parameters used to show pair information.
Parameters
DDNAME,
SYSNAME, or
UNITADDRESS
The following image shows an example of running the QUERY ICKDSF PPRCOPY command:
100 Business Copy Z pair user tasks using IBM PPRC and ICKDSF
Value
Device number
Value
DDNAME = dname = JCL statement identifying
the volume.
SYSNAME = sysxxx = SYSNAME in the ASSGN
system control statement.
UNITADDRESS = ccuu = device number.
Description
Only one of the three parameters can be
specified. The italic term is the arbitrary name.
For example, dname is the arbitrary unique
name of the JCL statement which identifies the
volume.