Troubleshooting Consistency Group Pair-Split Failures - HP XP7 User Manual

SSB2 code
2399
239D
239E
23A8
23A9
23AA
23AB
23AF
23BB
23EF
23F5
23F1
9100
B91 1
B912
B913
Related topics
"Troubleshooting consistency group pair-split failures" (page

Troubleshooting consistency group pair-split failures

If a consistency group (CG) pair-split fails, note the following:
The pairs in the CG are suspended ("Suspend/SUSPER" status).
If you are using a Cnt Ac-J Z S-VOL as a BC Z P-VOL and you are using RAID Manager to run
commands and the status for some pairs that are assigned to a CG are not changed, some
pairs remain unsplit in the CG and pair consistency is not guaranteed after you run the following
command:
pairsplit
The following are possible reasons why the status for some pairs that are assigned to a CG
are not changed:
◦
The Cnt Ac-J Z pair is assigned to a CG and the P-VOL and S-VOL have the same contents.
The journal volumes for this pair are full.
◦
The BC Z license is invalid.
◦
The BC Z pair volumes are blocked.
84 Troubleshooting Business Copy Z
Description
The reverse resynchronization was rejected because some of the pairs sharing the specified volume
as the P-VOL are not in split ("Split/SUSPOP" status) or suspended ("Suspend/SUSPER" status).
The pair was not created because you have set the Protect attribute for the volume you specified as
the P-VOL using BCM.
The pair was not created because you set the Protect attribute for the volume you specified as the
S-VOL using BCM.
The reverse resynchronization was rejected because the volume you specified is the P-VOL for XRC.
The pair was not restored because the volume you specified is the P-VOL for CC.
The pair task was rejected because the volume you specified as the S-VOL is the P-VOL for XRC.
The pair task was rejected because the volume you specified as the S-VOL is the P-VOL for CC.
The pair was not registered in the CG because IBM PPRC/BCM has reserved the specified CG number.
The pair was not created because the volume you specified as the S-VOL could not be used as the
S-VOL because of Volume Security settings.
The pair was not deleted because the P-VOL and S-VOL are in the process of being Quick Split.
The pair task was rejected because you set a split time for the CG.
The pair was not created because the CTG identifier you specified is not supported.
You cannot run the command because the system did not authenticate your user information.
The pair task was rejected because the specified volume did not exist.
The pair was not created because the specified S-VOL does not exist.
The pair task was rejected because the mirror ID is invalid.
84).