HP XP7 User Manual page 82

SSB2 code
2333
2334
2335
2336
2337
233A
233B
233C
233D
233E
233F
2342
2343
2344
2346
2347
234A
234B
2350
2351
82 Troubleshooting Business Copy Z
Description
The pair task was rejected because the volume you specified as the P-VOL is not the P-VOL of the
existing pair.
One of the following occurred:
The pair task was rejected because the volume you specified as the P-VOL had an emulation type
that BCM could not handle.
The CG pair-split was rejected because the volume you specified as the P-VOL is an intermediate
volume.
The pair task was rejected because the volume you specified as the S-VOL had an emulation type that
could not be handled by BCM.
The pair task was rejected because the emulation type of the specified P-VOL is different from the
emulation type of the S-VOL.
For more information about pair volumes and supported emulation types, see
supported emulation types" (page
The pair operation was rejected because the volume you specified as the P-VOL had already been
an S-VOL.
The pairresync RAID Manager command was rejected because the volume you specified as the
P-VOL is not a BC Z P-VOL.
The pair task was rejected because the volume you specified as the S-VOL is a root volume.
The pair task was rejected because the volume you specified as the S-VOL is a node volume, and the
volume you specified as the P-VOL is not the P-VOL for the specified S-VOL.
The pairsplit RAID Manager command was rejected because the specified P-VOL and S-VOLs
were a L2 pair, and the L1 pair is not split ("Split/SUSPOP" status).
The pair task was rejected because the volume you specified as the P-VOL is being used as another
BC Z P-VOL, and also that pair's S-VOL is used as a Cnt Ac-S Z P-VOL.
The pair task was rejected because the volume you specified as the S-VOL is the Cnt Ac-S Z P-VOL,
and the pair is not split ("Split/SUSPOP" status) or suspended ("Suspend/SUSPER" status).
The pair task was rejected because the volume you specified as the S-VOL is the destination of the
Auto LUN.
The pair was not created because the volume you specified as the S-VOL had already been an S-VOL.
The pair task was rejected because the volume you specified as the S-VOL for BC Z pair tasks is not
an S-VOL.
The volume you specified as a BC Z S-VOL is a Cnt Ac-S Z P-VOL. The pair task was rejected because
the Cnt Ac-S Z pair is not in the required status.
For more information about the required status for each pair task, see
user tasks" (page 67).
The volume you specified as a BC Z S-VOL was a Cnt Ac-S Z S-VOL. The pair task was rejected
because the Cnt Ac-S Z pair is not in the required status.
For more information about the required status for each pair task, see
user tasks" (page 67).
The pair creation for the cascade configuration was rejected because the volume you specified as
the S-VOL is an intermediate volume.
The pair task was rejected because the volume you specified as the S-VOL is the volume of the Auto
LUN.
The pair task was rejected because the specified P-VOL and the S-VOL for BC Z pair tasks is not a
pair.
The pair task was rejected because the volume you specified as the P-VOL and the volume you specified
as the S-VOL are the same.
12).
"Pair volumes and
"Pair status and supported pair
"Pair status and supported pair