Pedal Linkage - Taylor-Dunn RE-380-36 Service And Replacement Parts Manual

Brakes
RE-380-36 & RE-380-48

PEDAL LINKAGE

The pedal linkage to the master cylinder must be adjusted so that the master cylinder push rod IS NOT in contact
with the master cylinder plunger when the pedal is released. The brakes may drag or lock up if the push rod is in
contact with the plunger.
With the pedal released, adjust the linkage so that there 1/16 to 1/8 inch clearance between the push rod and the
plunger.
MR-380-05 Page 75