Taylor-Dunn RE-380-36 Service And Replacement Parts Manual page 23

RE-380-36 & RE-380-48
77-200-00: Hydrometer
Used for testing battery electrolyte.
Illustration is of a typical hydrometer, actual
hydrometer type may vary.
Molex # 11-300-02: Pin Removing Tool
Removes 0.062 diameter pins from Molex
rectangular harness connectors. Not
available from Taylor-Dunn. Purchase from
any local electronics distributor.
MR-380-05
77-201-00: Battery Filler
Used to safely add water to batteries.
Equipped with splash guard and auto-
shutoff when cell is full.
Molex # 11-300-06: Pin Removing Tool
Removes 0.093 diameter pins from Molex
rectangular harness connectors. Not
available from Taylor-Dunn. Purchase from
any local electronics distributor.
Tool List
70-440-55: Pin Removing Tool
Removes pin from Amp circular harness
connectors.
75-442-55: Pin Removing Tool
Removes pins from Molex Mini-Fit harness
connectors.
Page 23