6.5 Commissioning
Access right
Status
Commissioning
Settings
6.5.1 Country
Country
Country
Other countries
Press
and move
OK
Press
to go back.
Country
Addressing
Sections
Communication
Activate/Deactivate
Resets
Miscellaneous
to choose the country.
2018-08-01
6.5.2 Automatic addressing
Automatic addressing means that number of damper
and its IP address are automatically assigned to the
system in sequence by pressing the right button in the
FDS-S as described below.
ATTENTION!
Dampers connected to the slave units FDS-S can be
addressed in AUTOMATIC mode as well as in MANUAL
mode.
Dampers connected directly to the master unit
FDS-M can be only addressed in MANUAL mode.
Go to the ADDRESSING display on master unit.
Addressing
Automatic
Manual
Add single detector
Automatic addresmode
Address Mode:
NO
21