Instructions For The Sequence Controller; General; Operating Elements; Functional Display (Leds) - Deprag AST11-1 Operating Instruction Booklet

8

Instructions for the Sequence Controller

8.1 General

The sequence controller can be programmed by using the WEB-Interface or by the inte-
grated numeric keypad, whereby the programming choices on the keypad are more lim-
ited.
The sequence controller can be operated as a stand-alone unit or it can be operated by a
PLC.

8.2 Operating Elements

Figure 11: Operating Elements

8.2.1 Functional Display (LEDs)

The LED's located below the display notify the user about the operating status of the se-
quence controller:
Color Description
yellow Power
blue ready
green Status 
red Status 
Table 14: LEDs
Meaning
all voltage are O.K.
the sequence controller is ready
last screw assembly was O.K.
last screw assembly was not O.K.
36
function keys
functional display
menu- and cursor keys
numerical keys