Scope Of Delivery; Short Description - Deprag AST11-1 Operating Instruction Booklet

4

Scope of Delivery

Check that the shipment is complete and that there have been no damages in transit.
Quantity Designation
AST11-1 Sequence controller
AST11-1-S Sequence controller
1
AST11-2 Sequence controller
AST11-2-S Sequence controller
1 Patch cable (AST11 to PC connecting cable)
1 Plug (Interface GX6)
1 Quick-Start instructions for the Operation of...
1 Safety Instruction
5

Short Description

The sequence controller AST11 is a sequence controller with integrated performance elec-
tronics to operate DEPRAG MICROMAT-EC screwdriver or MINIMAT–EC screwdrivers
(stationary and handheld).
The AST11-1/-S can be operated with screwdrivers of the series 320Exx19 and 320Exx22
and 320Exx27.
The AST11-2/-S can be operated with screwdrivers of the series 320Exx36.
The sequence controller already includes standard screwdriving programs for tightening to
torque and loosening to angle. Parameters can be directly altered to suit screwdriving
tasks using the sequence controller's keypad. The AST11 allows free programming of your
screwdriving sequences for hand-held or stationary screwdriving tools. If required, further
screwdriving programs can quickly and easily be set-up using the already existing basic
program.
Fast access to the 16 programmable screwdriving programs is enabled by the integrated
display- and operating unit.
To set parameters and access additional control functions, simply use any common web
browser or the integrated key pad. Additional software is not required. The web interface
and the display are available in several languages to select from.
Several communication options, especially for stationary use, enable connection via ether-
net, fieldbus, PLC input-outputs and RS232.
The AST11 displays the screwdriving results of the last 7 production days. The screwing
applications can be analyzed and evaluated using the statistic and curve representations.
Extensive diagnostics possibilities help detect possible faults in the screw driving se-
quence, at the screwdriver or at the sequence controller.
Combination with an automated DEPRAG screw feeder is also possible.
10
Part no.
390041 A
390041 B
390042 A
390042 B
831902
385476 A
014090xx
016000