Menu For Functions Selection - Adash A4900 - Vibrio M User Manual

Menu for functions selection

button, the screen for next choice of data collection appears. (if memory function is
By pressing
available). By pressing the Menu button (left upper) the instrument menu appears. If the instrument
is in the error state (for example "SENSOR ERROR"), then some functions are not available.
LIGHT - Torch mode and stroboscope mode
TORCH
STROBO
ESC
MEMORY - Memory operation (if available)
ROUTE
VIEW
CLR DATA
CLR ALL
ESC
VOLUME - Phone output volume adjustment
SETUP - This item opens next item selection:
SPEED
ALARMS
MEASURE
UNITS
DISP.VAL.
ESC
SET TIME
ESC
- ESC - - Escape to the measuring screen
For USA Sales and Support: AdashAmerica
- Torch on
- Setup stroboscope
- Escape to the measuring screen
- Route measurement
- View of data
- Clear all measurements in route
- Clear all data
- Escape to the measuring screen
- Set of speed detection
- Selection of standard, which will define limit values
- Unit options for a measuring of a velocity signal (mm/s vs. ips)
- Detection type options for displacement measurements
- Escape to the measuring screen
- Time setting
- Escape to the measuring screen
Menu selection
buttons
MENU
Enter/escape
button
1-888-817-4335
Adash 4900 – Vibrio M
info@adashamerica.com