Adash Ltd.
A4300 - VA3 - Balancing
Finishing of project definition
Press ESC or left arrow on the parameters screen. The list of existing projects appears. Set the
pointer to the <new item> and press ENTER or START.
When you select the existed project, it will be rewritten by new project and all data will be lost.
Modify project Item
This item allows you to modify the project parameters of an existing project. It is the same process as
for new project definition. When you change some important parameters, then some measured values
which are not longer compatible, will be removed.
Erase project Item
It enables deleting of an existing project.
16
Adash Ltd., Czech Republic, Tel.: +420 59 6232670, Fax: +420 59 6232671, e-mail: info@adash.cz
For further technical and contact information consult www.adash.net, www.adash.cz