Figure 6.4 Main Frame Bottom
6
Turn the system over, fully open the display, and lift the control panel per
Figure 6.5 System Control Panel View
7
Expose the underside of the Control Panel by lifting from under the front edge and hinge via the top
edge toward the LCD display per
Figure
6.6.
Remove flex cable from
TGC assembly
Don't forget these two
screws to release the
Control Panel. (Refer to
arrow lines in the figure
to the left).
Remove two screws in
TGC to allow fan access.
Figure
6.5.
Lift control panel from
the front.
Chapter 6: Replacement Procedures
47