Production (F1) - SAMES KREMLIN Cyclomix Micro User Manual

10. PRODUCTION (F1)

Program
If the CYCLOMIX
carried out to bring the mixed material to the gun.
We advice you to shut off air during that stage.
When passing for the first time to production, the CYCLOMIX
The control unit consists of a countdown that enables to know, in percentage (9  between 90% and
100% of the volume), the pending volume flow according to the P3 parameter. At the end of that stage, the
TM
CYCLOMIX MICRO enters in production. You can also activate ESC during the fluid priming; we advice
you not to start painting immediately.
In production, as well as in regeneration, the CYCLOMIX
base constant flow. At the end of each injection, the CYCLOMIX
adjusts the volumes of injections considering the mixing difference.
In production, there are 3 main cases :
- the operator is spraying and the CYCLOMIX
displayed on the screen.
TM
- the CYCLOMIX MICRO stops because of a dysfunction. The kind of breakdown is displayed on the
screen, the CYCLOMIX
"TROUBLESHOOTINGS") .
TM
- The CYCLOMIX MICRO has reached the maximum life duration of the material and passes
automatically in regeneration mode. The CYCLOMIX
operator. The following screen is displayed :
You can stop the regeneration activating ESC. Then, the regeneration stops, but
careful, the quality of the product can be inferior.
To exit from production : activate ESC. The following screen is displayed :
In the 3 shades' version, during the color change, the potlife is updated with the new parameters of the
selected color. If you validate another color, the potlife in progress with the old color will remain until a flushing
or a regeneration is carried out.
SAMES KREMLIN
TM
MICRO is not in mixed material, a regeneration is automatically
TM
TM
MICRO emits a sound signal to inform the operator (cf §
Open the gun until the regeneration ends.
Page 23
Real mixing ratio
TM
MICRO carries out a regeneration :
TM
MICRO injects little volumes of catalyst in a
TM
MICRO checks the mixing and re-
MICRO operates correctly. The real mixing ratio is
TM
MICRO emits a sound signal to inform the
Potlife (9-0)
Manual : 573.191.112