Application Programming (F3); Password; Procedure To Get The Version Number Of The Electronic Card - SAMES KREMLIN Cyclomix Micro User Manual

9. APPLICATION PROGRAMMING (F3)

To alter the parameters of the CYCLOMIX
another, use the arrows
Select the parameter to alter. Depress the key

value. Activate to validate the new value or ESC to cancel.
To quit a parameter, activate ESC.
To quit the PARAMETERS menu, activate ESC.
When using a 3 shades' CYCLOMIX
parameters.
The parameters are pre-programmed in the factory. They must be modified (by an authorized person) to
adapt themselves to the material.


PASSWORD

When you start the CYCLOMIX
is deactivated, everyone is able to modify the CYCLOMIX
To activate this access code you have to :
- enter in the parameter 0 of the menu F3 :
''
code appears, it's the code present by default in the equipment.
- change the code by using the arrows
code.
Once the access code was validated, the access is protected by the password. Only the people who
know this password and those which know the administrator code
menu `Parameters'.
Each time a user wants to enter in the menu 'Parameters' the password will be required:
The user shall enter the password by using the arrows
which compose this code :
- If the entered code is correct, the following fonts
- If the entered code is incorrect, the word '
you to enter the password again (Press 'Esc' to return to the principal menu).
If you want to desactivate the password, you just have to parameterise the code
access code.


PROCEDURE TO GET THE VERSION NUMBER OF THE ELECTRONIC CARD

- Install the magnet on the OK key,
- Start the CYCLOMIX
SAMES KREMLIN
TM
MICRO, go to F3, then validate. To shift from a parameter to
 .
or

TM
MICRO, you must select the shade and alter later on the
TM
MICRO for the first time the access code of the menu `Parameters'

or
TM
MICRO.
Page 19

, then the arrows or
TM
MICRO parameters.

      
« key »


and the «key » for each digit which compose this
''
 
or and the «key

appear.

appears and the CYCLOMIX

to increase or decrease the

« key ». The
will be able to reach the
 

» for each digit
TM
MICRO allows
''
again as
Manual : 573.191.112
.