SAMES KREMLIN Cyclomix Micro User Manual page 15

CONTROL UNIT :
SAMES KREMLIN
STAINS FRANCE
CE
Tension
P air
P prod
Serie / Serial
Ref
Phase
Fréquence
Ampérage
NE PAS DEBRANCHER
SOUS TENSION
DO NOT DISCONNECT
WHILE POWER ON
FLUID MODULE :
SAMES KREMLIN
STAINS FRANCE
CE
P air : 6 bar / 87 psi
P prod : 175 bar / 2536 psi
NE PAS DEBRANCHER
SOUS TENSION
DO NOT DISCONNECT
WHILE POWER ON
Caution!
The CYCLOMIX
It must be installed in a safe area (non explosive area according to the ATEX directive).
The control unit must not be above the fluid module.
The control unit must be connected to a mains supply fitted with a ground.
The ground of the fluid module must be grounded.
SAMES KREMLIN
Name and address of the manufacturer
European conformity
TM
CYCLOMIX MICRO voltage
Maximum air pressure
Maximum fluid pressure
Number given by SAMES KREMLIN. The two first numbers indicate the
manufacturing year.
TM
CYCLOMIX MICRO part number
Single phase
50-60Hz / Mains frequency
Maximum current used
-
Environmental Indication
(refer to § 2 - Environment)
Name and address of the manufacturer
European conformity
Maximum air pressure
Maximum fluid pressure
-
Environmental Indication
(refer to § 2 - Environment)
TM
MICRO mixing system must be installed outside the explosive area.
Page 10 Manual : 573.191.112