Geo M1210 & Geo M1220; System Specifications; Dimensions (Mm/Inches) - Nexo GEO M1210 System Manual

Page 70/90
8.2 GEO M1210 & GEO M1220

8.2.1 System specifications

GEO M12 WITH NEXO TDCONTROLLER SETUP
Frequency Response @-6 dB
Sensitivity 1W@1m
Peak SPL@1m
Vertical Dispersion
Horizontal Dispersion
Passive Crossover Frequency
Nominal Impedance
Recommended Power
PRODUCT FEATURES
LF Component
HF Component
Height x Width x Depth
Weight: Net
Connectors (Touring version)
Connectors (Install version)
Active / Passive mode selection
Construction
Fittings
Front Finish (Touring version)
Front Finish (Install version)
Operating temperature range
Storage temperature range
Recommended powering solution
Optional powering solution

8.2.2 Dimensions (mm/inches)

TECHNICAL SPECIFICATIONS
GEO M1210 GEO M1210
TM TM
(without CDD ) (with CDD )
50 Hz to 20 kHz
105 dB SPL Nominal
10°
80° 120°
Active mode : (8 Ω LF + 16 Ω HF) / Passive mode : 8 Ω
Active mode : (1250 Watts LF + 625 Watts HF) / Passive mode : 1250 Watts
1 x 12" 8 Ohms long excursion Neodymium driver with PDD
1 x 3" voice coil 1.4" throat driver on a BEA/FEA optimized HR Wavesource
370 mm x 700 mm x 446 mm (14.6" x 27.6" x 17.6")
34 kg (75 lb)
2 x NL4, 4 poles connectors (1+/1- Through, 2+/2- GEO M12 in passive mode,
1+/1- LF, 2+/2- HF in active mode)
2 x Cable gland with 4 cores connectors
Ruggedized, recessed, waterproof 2 positions switch
Lightweight Polyurethane Composite
2 x Side handles horizontal + back grip
Steel front grill + back mesh
Acoustic fabric fitted front grill
0°C – 40°C (32°F – 104°F)
-20°C – 60°C (-4°F – 140°F)
NXAMP4x4 Powered TD controller: up to 3 x GEOM12 in passive mode per
channel
NXAMP4x2mk2 Powered TD controller: 1 x GEOM12 in passive mode per
channel
NXAMP4x1mk2 Powered TD controller (Bridged): up to 2 x GEOM12 in passive
mode per channel
GEO M1220 GEO M1220
TM
(without CDD ) (with CDD
140 dB
20°
80° 120°
1.1 kHz
TM
TM
)
TM