Table of Contents
Advertisement
Page 38/90
6.3.4 MSUB18 and GEO M12 with Ministack adaptor
Ministack adaptor only allows to stack GEO M12 in "left" configuration
Required item
-
1 x VNT-MNSTKM12
Ground stack assembly is rated for a maximum of 2 x MSUB18 + 3 x GEO M12 in any inter
cabinet angle configuration with +12/-15° initial angle, provided this device is assembled
according to below rules:
-
MSUB18 must always be installed on a horizontal surface
-
Public is not allowed within a safety area which radius is equal or higher than
assembly height.
Procedure
-
Position first MSUB18 on the ground
-
Position second MSUB18 (front or back) on top of first, and lock front and rear connecting points
-
Pull the latch to unlock the link bar of VNT-MNSTKM12
-
Insert VNT-MNSTKM12 back into MSUB18 rear upper slot and push it forward so that front opening
are aligned with MSUB18 front connecting points.
-
Unlock upper MSUB18 connecting points
GEO M12 HARDWARE SETUP PROCEDURE
IMPORTANT
Hide quick links:
Advertisement
Table of Contents
