Page 10/90
2.2.2 MSUB18-I connectors
MSUB18-I are connected through 2 fast connectors located behind the corner plates as in drawing below.
In order to connect for installation:
-
Remove the corner plates.
-
Pass the cables through corner plate openings (maximum cable outside diameter is 11mm / 0.4",
maximum gauge wire is 2.5 mm
cable)
-
Prepare cable as below
-
Connect to the fast connectors (+): Brown (or Red) / (-): Blue (or Black).
-
Remount the corner plate.
GEO M12 GENERAL SET-UP INSTRUCTIONS
2
/ AWG13 for solid cable and 4 mm
2
/ AWG11 for multi-stranded