6.2.4 GEO M12-I and MSUB18-I rigging systems
For permanent installations where systems won't have to be frequently assembled and disassembled
-
GEO M12 AutoRig
-
GEO M12 rear pin is replaced by a shoulder screw with a break nut
-
MUB18 semi auto-lock system is replaced with pins and safety clips
Please note that these are shipped together with GEO M12-I and MSUB18-I
6.2.5 Accessories
GEO M12 & MSUB18 accessories are:
VNT-BUMPM12
VNT-GSTKM10M12L
GMT-LBUMPM12
GEO M12 HARDWARE SETUP PROCEDURE
TM
is replaced by an axis with break nuts
VNT-EXBARM12
VNT-GSTKM10M12S
GMT-EXBARM12L
Page 29/90
VNI-BUMPM12
VNT-MNSTKM12
GMT-FLGM12