Table of Contents
Advertisement
Boot
InsydeH2O Setup Utility
Main
Advanced
Security
Boot
Numlock
<Off>
Boot Type
<Dual Boot Type>
Network Stack
<Disabled>
PXE Boot capability
<Disabled>
USB Boot
<Enabled>
Quiet Boot
<Disabled>
F1
Help
↑/↓
Select Item
F5/F6
Esc
Exit
←/→
Select Item
Enter
Numlock
Select the power-on state for numlock.
Boot Type
Select the boot type. The options are Dual Boot Type, Legacy Boot Type or UEFI Boot
Type.
If you select "Dual Boot Type" or "UEFI Boot Type", the "Network Stack", "PXE Boot
capability", "USB Boot" and "Quiet Boot" will show up.
If you select "Legacy Boot Type", "PXE Boot to LAN", "USB Boot" and "Quiet Boot" will
show up.
Note:
If the boot type is set to UEFI, the method for RAID volume creation will be different.
Please refer to Chapter 5 ˗ RAID for more information.
Network Stack
This field is used to enable or disable network stack.
PXE Boot capability
Disabled Suppoort Network Stack
UEFI IPv4/IPv6
Legacy Legacy PXE OPROM only
Chapter 3 BIOS Setup
Rev. 5.0
Exit
Selects Power-on state for
Numlock
Change Values
F9
Setup Defaults
Select
SubMenu
F10
Save and Exit
Chapter 3
PXE Boot to LAN
Disable or enable PXE boot to LAN.
USB Boot
Enable or disable booting to USB boot devices.
Quiet Boot
Enable or disable booting in text mode.
43
www.dfi .com
Advertisement
Table of Contents
