Lan Ports; Usb Ports - DFI PL610-C622 User Manual

LAN Ports

10GLAN
MNG
GLAN
Features
• 1 i350-AM2
• 1 CS4227
• 1 RTL8211F
The LAN port allows the system board to connect to a local area network by means of a
network hub.
BIOS Setting
Configure the onboard LAN ports in the Advanced menu ("ACPI Configuration" submenu) of
the BIOS. Refer to the chapter 3 for more information.
Driver Installation
Install the LAN drivers. Refer to the chapter 4 for more information.
Chapter 2 Hardware Installation
Chapter 2
Battery
9

USB Ports

USB 2
USB 1
USB 2.0
Battery
USB 3
1 4
9
10
USB 2.0
USB 2.0
The USB device allows data exchange between your computer and a wide range of simultane-
ously accessible external Plug and Play peripherals.
The system board is equipped with 2 onboard USB 2.0 ports (USB 1-2) and 1 vertical USB 2.0
port (USB 3). The 10-pin connector allows you to connect 2 additional USB 2.0 ports (USB
4-5). The 20-pin connector allows you to connect 2 additional USB 3.0 ports (USB 5-6). The
additional USB ports may be mounted on a card-edge bracket. Install the card-edge bracket
to an available slot at the rear of the system chassis and then insert the USB port cables to a
connector.
BIOS Setting
Configure these onboard USB devices in the Advanced menu ("USB Configuration" submenu)
of the BIOS. Refer to the chapter 3 for more information.
18
9
USB 4-5 USB 5-6
1
2
USB 3.0
www.dfi .com