DFI PL610-C622 User Manual page 31

CPU Configuration
This section is used to configure the CPU.
InsydeH2O Setup Utility
Advanced
CPU Confi guration
Intel Speed Step <Enabled>
Turbo Mode <Enabled>
Hyper-Threading <Enabled>
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter

Intel Speed Step
This field is used to enable or disable the Intel Enhanced SpeedStep Technology.
Turbo Mode
Enable or disable the turbo mode.
Hyper-Threading
Enables this field for Windows and Linux which are optimized for Hyper-Threading
technology. Select disabled for other OSes not optimized for Hyper-Threading technol-
ogy. When disabled, only one thread per enabled core is enabled.
Chapter 3 BIOS Setup
Chapter 3
Rev. 5.0
Enable/Disable EIST (P-
States)
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Video Configuration
This section configures the video settings.
Advanced
Video Confi guration
Display Mode
PCIE 64-bits MMIO decode
F1 Help ↑/↓ Select Item
Esc Exit ←/→  Select Item
Display Mode
Set the display mode configure type.
PCIE 64-bits MMIO decode
Enable or disable PCIE 64-bits memory-mapped input/output (MMIO) decode.
31
InsydeH2O Setup Utility Rev. 5.0
Set Display Mode Confi g-
ure Type.
<On Board First>
<Disabled>
Display Mode
Plug In First
On Board First
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi .com