Jumper Settings; Bmc/Pch Smb Host Select; Clear Cmos - DFI PL610-C622 User Manual

Jumper Settings

BMC/PCH SMB Host Select

3
2
1
1-2 On:
BMC SMB Host (default)
3
JP16
2
1
2-3 On:
PCH SMB Host
JP16 is used to select SMB host: BMC or PCH.
Chapter 2 Hardware Installation
Chapter 2
Battery
9
14

Clear CMOS

Battery
9
If you encounter the followings,
a) CMOS data becomes corrupted.
b) You forgot the supervisor or user password.
you can reconfigure the system with the default values stored in the ROM BIOS.
To load the default values stored in the ROM BIOS, please follow the steps below.
1. Power-off the system and unplug the power cord.
2. Set JP15 pins 2 and 3 to On. Wait for a few seconds and set JP15 back to its default set-
ting,
pins 1 and 2 On.
3. Now plug the power cord and power-on the system.
1 2 3
1-2 On:
Normal (default)
JP15 1 2 3
2-3 On:
Clear RTC Registers
www.dfi .com