Paper Roll Holder; Table Extender - OAKWORKS WOMEN’S IMAGING Instruction Manual

DIRECTIONS FOR USE
CAUTION
Do not put excessive weight
or pressure on table extender.
PAPER HOLDER USE
To load the paper, pull down on
two paper holder support arms
located on the under side of backrest.
Rotate to 90º position.
Pull paper and thread thru two straps
across the upholstered top to keep in place.

TABLE EXTENDER

Lengthens the table allowing for access to the patient's neck for cartoid
artery exams and thyroid exams.
NOTE:
You will need
an accessory mounting
plate in order to use the
table extender.
1. Locate Accessory
Mounting Plate.
2. Insert Table Extender
tubes into Accessory
Mounting Plate
21
Insert rod thru paper roll and place
rod into the holes in the support arms.
Note: The paper "hold down" strap is
attached with Velcro ® . This allows strap
tension adjustment if necessary.