Description; Verifying The Shipment - Keysight Technologies U3045AM04 User's And Service Manual

Multiport test set extension

Table of Contents

U3045AM04

Description

The Keysight U3045AM04 is a Multiport Test Set that adds 4 ports to extend

the 4-Port network analyzer to 8 full crossbar test ports with N-Port calibration

capability.

The Keysight U3045AM04 has the following key features:

— 4 test ports (2.4 mm male connectors)

— Low Loss Mechanical RF switching

— Frequency Range of Operation: 10 MHz - 50 GHz

— Test Set I/O interface for operational control with the network analyzer.

— A standard Keysight System II instrument cabinet (4EIA height x 497.8 mm

The N5244/5A PNA-X network analyzer will be referred to throughout this

document as the analyzer. The U3045AM04 will be referred to as the test set.

To verify the contents shipped with your product, refer to the "Box Content

List" included with the shipment.

Inspect the shipping container. If the container or packing material is

damaged, it should be kept until the contents of the shipment have been

checked mechanically and electrically. If there is physical damage refer to

"Contacting Keysight" on page

any) for inspection by the carrier and an Keysight Technologies representative.

Keysight U3045AM04 User's and Service Guide

Option 551 is required for N-port calibration. An external personal

computer is not required.

depth)

82. Keep the damaged shipping materials (if

Table of Contents

Do you have a question about the U3045AM04 and is the answer not in the manual?