Chapter 2. System Setting; Overview; To Call Up The Initialize Menu; Program - Furuno NX-700B Service Manual

Overview

1. To call up the Initialize menu

The menu includes the Initialize1 and Initialize2 menus as option menus. These menus
include special settings and items related to maintenance. To call up these menus, hold
down both the [+] and [-] keys of the DIM for over 5 seconds on a screen on which the
popup display is not shown and the received message list or received messages are
shown.
The Initialize1 and Initialize2 menus are added in the menu list as shown below.

2. Program

The program which complies with the "IEC Standard" is Ver-01.02 and the program
which complies with the "Russia type approval" is Ver-02.01. The table below shows
the differences of these programs.
Different points
NAVTEX memu
Display menu
Initialize2 menu
Initialize2 -> ACK
Default of Command
Initialize1 -> 00 MSG
Default of Priority
Distinction and stop of
warning alarm beeps
Whether or not to output
$ALR to the serial output
when a warning alarm is
generated.

Chapter 2. System Setting

Menu
+
NAVTEX
System
DIM
Display
-
Service
Initialize1
Initialize2
Ver-02.01
Mask Mode
Auto Rcv Mask/
Local Channel/Rcv Mask/
INS Output Mask/Printer Mask
"User Select Station & Msg" is
present.
Russia Mode is present.
Receive
B1 > 00 > B2
Output
2-1
Table 2.1 Program version
Program Version
Ver-01.02
Receiver Mode/
Local Channel/Auto Print/
Rcv Station & Msg/
User Select Station & Msg
"User Select Station & Msg" is
not present.
Russia Mode is not present.
B1 > 00 > B2, but it is set to
00 > B1 > B2 as the default.
See page 2-17.
Not output
Overview
Ignore