Installation - Furuno NX-700B Service Manual

Printing of header:
[MENU] -> Service
-> Print Header: ON

1.1.2 Installation

1. Install the Display unit NX-700A or NX-700B at a place where the ship is normally
navigated.
2. Input the ZDA sentence. Without the entry of the ZDA sentence, the time stamp on
the header of printing and the reception time to be displayed in the reception list are
shown blank.
3. Input NAV data.
Without the input of the position data, the Auto mode: Automatic station selecting
function does not work and broadcasting from all stations is received. In this case,
NAVTEX stations are to be manually set.
The following sentences of IEC61162-1/2 can be accepted;
- Time and date
- Position
- SOG
- STW
- COG
Local broadcasting of Korea
Non-alphabetic characters are
illegible.
Fig. 1.1.3 Example of printing
: ZDA
: GNS > GGA > RMC > GLL
: VTG > VBW > RMC
: VHW > VBW
: VTG > RMC
1-3
1.1 Overview