User Display - Furuno NX-700B Service Manual

2. User display

Position data display
Related setting:
Select [MENU] -> Display ->
User Display -> Nav Data
(GNS > GGA > RMC > GLL)
SOG/COG data display
Related setting:
- Select [MENU] -> Display -> User Display ->
Nav Data
- Select [MENU] -> Display -> Speed display ->
SOG, STW
(SOG: VTG > VBW > RMC)
(STW: VHW > VBW)
(COG: VTG > RMC)
- [MENU] -> System -> Unit
Distance display
Shows the distance between the own ship
position and the position of the position data
(N, S/ E, W) included in the selected received
message.
Related setting:
- Select [MENU] -> Display -> User Display ->
Distance
- [MENU] -> System -> Unit
ZCZC AB11
THIS IS xxxx
xx-xx N, xxx-xx E
yy-yy N, yyy-yy E
NNNN
xx-xx N, xxx-xx E
Distance
yy-yy N, yyy-yy E
Own ship
Fig. 1.2.7 Distance display
518
ALL MESSAGE
MAY 07 2005
135 20. 123' E
SOG 11.2 kt
[ ][ ] SCROLL
[MENU] MENU
[LIST] LIST MENU
Fig. 1.2.6 Nav Data display
518
ALL MESSAGE
[ ][ ] SCROLL
[MENU] MENU
[LIST] LIST MENU
This display is intended as information so that
a user can make a judgment as to whether the
received message is relevant to the own ship,
on the basis of the own ship position and the
position information included in the received
message.
For instance, if the position data of X and Y is
included in the received message, the distance
to X is calculated since the position X is nearer
to the own ship position than the position Y.
1-10
1.2 Operation Guide
Date & Time display
Related setting:
Select [MENU] -> Display ->
User Display -> Nav Data
(ZDA data is displayed.)
x MESSAGE
00:00:18
45 40. 001' N
COG 45.8
[ ][ ] CHANGE FREQ
[ENT] SHOW MESSAGE
[PRINT] PRINT MENU
x MESSAGE
DISTANCE 123.4 nm
[ ][ ] CHANGE FREQ
[PRINT] PRINT MENU