Furuno NX-700B Service Manual page 123

3. PRINTER SECTION
3.1 Printing system
3.2 Printing paper
3.3 Printing width
3.4 Character format
3.5 Dot pitch
3.6 Number of characters
3.7 Print speed
4. ANTENNA UNIT
4.1 Antenna type
4.2 Output impedance
4.3 Power supply
5. INTERFACE
5.1 Input data
5.2 Output data
5.3 Alarm
6. POWER SUPPLY
7. ENVIRONMENTAL CONDITION
7.1 Ambient temperature
Antenna unit
Receiver / Display unit -15°C to +55°C
7.2 Relative humidity
Line thermal head printing system
Thermal paper (58 mm x 30 m)
48 mm
24 x 12 dot
8 dots/ mm
32 characters/line
Approx. 20 mm/sec.
NX-7H: H-field antenna
50 ohms
+7 VDC to +9 VDC (thru coax. cable)
IEC61162-1/2
GGA, GLL, RMC, ZDA, NRQ, NMK, ACK, GNS,
VHW, VTG, VBW
NRX, ALR
Photo MOS Contact closure signal (max. 0.5 A, 50 V) for
SAR alert
+12 VDC to +24 VDC: 1.5 A to 0.8 A
-25°C to +70°C
95 % at 40°C (without dew condensation)
AP1-2
Appendix 1. Specifications