Chapter 7. Maintenance; Call Up The Initialize Menu; Self Test; Menu] -> Service -> Test - Furuno NX-700B Service Manual

Call up the Initialize menu

The Initialize menu includes the Initialize1 and Initialize2 menus as option menus.
These menus include special settings and items related to maintenance.
To call up these menus, hold down both [+] and [-] keys of the DIM for over 5 seconds
on a screen on which the popup display is not shown and the received message list or
received message is shown.
The Initialize1 and Initialize2 menus are added in the menu list as shown below.

7.1 Self Test

It includes the Self Test performed by users and by service men and Self Test performed
at the factory.
7.1.1 [MENU] -> Service -> Test
Procedure
1. Select [MENU] -> Service -> Test. Select "Yes" and press the [ENT] key.
Then the test starts.
Menu
NAVTEX
System
Display
Service

Chapter 7. Maintenance

Menu
+
DIM
-
Service
INS Input Speed 4800bps
INS Output Speed 4800bps
Printer Header On
Edit Station List
Default Setting
Test
Rcv Monitor
7-1
NAVTEX
System
Display
Service
Initialize1
Initialize2
Start test ?
(Print will be canceled.)
7.1 Self Test
Yes No