Signal Monitor; Key Beep - Furuno NX-700B Service Manual

Received Program
Msg. Version
01.02
A or B or L
02.01
01.02
D
02.01
01.02
A or B or
L+ D
02.01

2. Signal Monitor

This is the setting whether or not to output a receiving monitor beep on the international
or local frequency. See page 7-10 for details.

3. Key Beep

This is the setting whether or not to output a beep when a key is pressed.
ALM beep
output
Stopped by pressing any key
1. Stopped by pressing any key
Every second
2. Stopped by the sentence from the INS
ON/OFF
Note:
Even when the alarm is outputted by multiple
alarm messages, the alarm is stopped by just
pressing one key as described above.
Every second
Same as above
ON/OFF
Every 0.5 s
Same as above
ON/OFF
1. Stopped by pressing any key
2. Stopped by the sentence from the INS
Every second
Note:
ON/OFF Even when the alarm is outputted by multiple
alarm messages, the alarm is stopped by one
operation (1 or 2) described above.
1. When any key is pressed, the alarm of the
message D is stopped. And then when any key is
Every 0.125 s pressed, the alarm of the message A, B, and L is
ON/OFF stopped.
2. By the sentence from the INS, alarms of
message A, B, L and D are separately stopped.
2-17
2.3 Setting of System menu
Table 2.3.1 Alarm Operation
How to stop alarm
Buzzer
For Receiving monitor beep,
Key click beep
(On/Off)
(On/Off)