Operation Guide; Status Display - Furuno NX-700B Service Manual

Navtex receiver
Hide thumbs Also See for NX-700B:
Table of Contents

Advertisement

1.2.4 Operation Guide

1. Status display

Icon
Status
I
Blinking
Blinking
L1
Blinking
L2
Blinking
I
Blinking
L1
Blinking
L2
Lighting
X
Lighting
P
Lighting
R
Lighting
DEMO
The received frequency is switched by
the [<] and [ [>] keys among 518 kHz,
490 kHz or 4209.5 kHz.
Related setting:
[MENU] -> NAVTEX -> Local Channel
Selection of received message
Related setting:
Select messages on the [LIST] menu.
- All Message
- Alarm Message: A, B, D, L
- User Select Message:
* [MENU] -> Display ->
User Select & Msg *
- Good Message:
* Message whose error rate is 4 %
or less. *
- Lock Message (Unlock Message)
Shows that there is an unread message on the international frequency
(518 kHz).
Shows that there is an unread message on the local frequency
(L1: 490 kHz, L2: 4209.5 kHz).
Shows that a message is being received.
I: International frequency (518 kHz), L1: Local frequency (490 kHz)
L2: Local frequency (4209.5 kHz)
In the Russia mode, an icon corresponding to the selected frequency lighting.
Shows that the voltage of the battery for backup of memory (SRAM) goes
down below +2.5 VDC. The display also shows a popup message as "Battery
error". When this error message is displayed, replace the lithium battery of the
CPU board. Voltage adequate for SRAM (received message) backup is
+1.8 VDC or more.
Related setting:
[MENU] -> Service -> Test: Battery
Detects "PE" signals outputted from the printer.
Printer error: Displayed when paper runs out or printer door open is detected.
The display also shows a popup message as "Printer error".
Shows that printing is under way.
Related setting:
[PRINT]
[MENU] -> NAVTEX -> Printer Mask (Ver.02.01)
[MENU] -> System -> Printer
Shows that the status is in the DEMO mode.
To enter this mode, select "ON" in [MENU] -> Initialize1 -> Demo.
1-8
Meaning
I
L1
L2
518
ALL MESSAGES
The number of selected received messages.
Up to 200 messages are stored for two
frequencies, respectively.
Fig. 1.2.4 Status display
1.2 Operation Guide
DEMO
I
L1 L2
X
P
R
x MESSAGE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nx-700a

Table of Contents