Restrictions For Use; Zenit Clt, Zenit R Clt Option; Care; Cleaning - Otto Bock Zenit Instructions For Use Manual

6.15.1.4 Restrictions for use

WARNING
Risk of accidents and injury due to using the product with certain settings and/or installed options
Severe injury in case of accidents due to options coming loose
► Before using the product as a seat in a vehicle for transporting persons with reduced mobility, remove options
that need to be taken off for safe transportation. Please observe the following table.
► Stow all dismantled components securely in the vehicle for transporting persons with reduced mobility.
► Please note that certain settings on the product exclude the use of the product in a vehicle for transporting
persons with reduced mobility.
1
Option
Clinical mounting kit
Head support
Lap belt
1
Not all of the options named are installed on all products.
2
The belt can be used to position the passenger during transportation. Using the personal restraint system is nev­
ertheless required.

6.15.2 Zenit CLT, Zenit R CLT Option

WARNING
Improper use in vehicles for transporting persons with reduced mobility
Risk of serious injury when using the product as a seat
► The product has not been approved by the manufacturer for use as a seat in vehicles for transporting persons
with reduced mobility. Please refer to the prohibition symbol on the nameplate (see below).
► In vehicles for transporting persons with reduced mobility, only use the seats installed in the vehicle with the
corresponding personal restraint systems.
► Information on the current status of our measures is available from your specialist dealer.
If the adjacent symbol appears on the nameplate, this indicates the following:
The product may not be used as a seat in vehicles for transporting persons with reduced mobility.

6.16 Care

6.16.1 Cleaning

1) Clean the padding and upholstery with warm water and a mild detergent.
2) Remove any spots with a sponge or a soft brush.
3) Rinse with clear water and let the components dry.
Important information on cleaning
• Do not use any aggressive cleaners, solvents or hard brushes etc.
• Clean plastic parts, frame parts and the chassis and wheels with a mild cleaner and a damp cloth. Dry thor­
oughly afterwards.

6.16.1.1 Cleaning Seat Cushions

Standard seat cushion
► Clean the seat cushion according to the attached care label.
Seat cushion with foam core
1) Open the zipper and remove the foam core (see fig. 43).
2) Clean the cover according to the attached care label.
3) Wash all foam parts by hand at 40°C using a mild, environmentally friendly detergent. Allow to air dry.
Zenit
Transportation in a Option must be
vehicle for trans­ removed
porting persons
with reduced mobil­
ity not possible
Secure option on
product
X
X
X
Use
2
29