Table of Contents
Advertisement
Home >
Network
>
Additional Methods of Configuring Your Brother Machine for a Wireless Network
®
Wi-Fi Direct
>
Configure Your Wi-Fi Direct Network
Push Method
Configure Your Wi-Fi Direct Network Using the One-Push Method
>> HL-3160CDW
>> HL-3190CDW
HL-3160CDW
If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network:
1. Press a or b to select the [Network] option, and then press OK.
2. Press a or b to select the [Wi-Fi Direct] option, and then press OK.
3. Press a or b to select the [Push Button] option, and then press OK.
4. When [Wi-Fi Direct On?] appears, select On.
5. Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when
[Activate Wi-Fi Direct on other device and press OK.] appears on the machine's LCD.
Press OK on your machine.
This will start the Wi-Fi Direct setup.
6. Do one of the following:
•
When your Brother machine is the Group Owner (G/O), connect your mobile device to the machine
directly.
•
When your Brother machine is not the G/O, it will display available device names with which to configure
a Wi-Fi Direct network. Press a or b to select the mobile device you want to connect to and press OK. To
search for available devices again, select [<Rescan>], and then press OK.
7. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed
the Wi-Fi Direct network setup.
HL-3190CDW
If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network:
When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi
Direct connection request received. Press [OK] to connect.] will appear on the LCD.
Press [OK] to connect.
1. Press
[Settings] > [All Settings] > [Network] > [Wi-Fi Direct] > [Push Button].
2. Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when
[Activate Wi-Fi Direct on other device. Then Press [OK].] appears on the machine's
LCD. Press [OK] on your machine.
This will start the Wi-Fi Direct setup. To cancel, press
3. Do one of the following:
•
When your Brother machine is the Group Owner (G/O), connect your mobile device to the machine
directly.
•
When your Brother machine is not the G/O, it displays available device names with which to configure a
Wi-Fi Direct network. Select the mobile device you want to connect to. Search for available devices again
by pressing [Rescan].
4. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed
the Wi-Fi Direct network setup.
> Configure Your Wi-Fi Direct Network Using the One-
.
>
Use
95
Advertisement
Table of Contents
