Table of Contents
Advertisement
Error Code
Problem and Recommended Solutions
TS-08
Two or more WLAN access points that have WPS enabled are detected.
•
•
Related Information
•
Print the WLAN Report
•
My Brother Machine Cannot Print over the Network
•
I Want to Check that My Network Devices are Working Correctly
•
Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected Setup
(WPS)
•
Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected Setup
•
Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard
•
Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast
•
Configure Your Machine for an Enterprise Wireless Network
Confirm that only one WLAN access point/router within range has the WPS method active
and try again.
Try starting again after few minutes in order to avoid effects from other access points.
™
™
(WPS)
107
Advertisement
Table of Contents
