Table of Contents
Advertisement
Home >
Machine Settings
Tables
> Settings Tables (HL-3160CDW)
Settings Tables (HL-3160CDW)
Related Models: HL-3160CDW
Use these tables to understand the various menus and options that you will use to set your preferences on the
machine.
[General Setup]
Level 1
Level 2
Tray Setting
Paper Type
Paper Size
Check Size
Manual Feed
Ecology
Eco Mode
Toner Save
Sleep Time
Quiet Mode
Auto Power Off -
Panel Control
Button Repeat
Message Scroll -
LCD Contrast
Auto Online
Setting Lock
-
Interface
Select
Auto IF Time
Input Buffer
Delete Storage Macro ID
Font ID
Format
[Printer]
Level 2
Emulation
>
Change Machine Settings from the Control Panel
Level 3 Description
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Level 3
Level 4
-
-
Set the type of paper in the paper tray.
Set the size of paper.
Select whether to display a message telling you to check that the
size of the paper in the machine and the machine's Paper Size
setting match.
Select whether to print from the Manual Feed Slot.
Turn the following machine settings on at the same time.
•
2-sided Print: Long Edge (Available only for certain
models)
•
Sleep Time: 0Min
Increase the page yield of the toner cartridge.
Set how much time will pass before the machine enters Power
Saving mode.
Decrease printing noise.
Set the number of hours that the machine will remain in Deep
Sleep mode before going into Power Off mode.
Set the time for the LCD message to change when holding a or b
at intervals.
Set the time in seconds that an LCD message will scroll across the
LCD. From Level 1=0.2 s to Level 10=2.0 s.
Adjust the contrast of the LCD.
Set the machine to return to Ready mode after it has been idle for
30 seconds.
Lock your machine's settings using the Setting Lock password.
Select the interface to use.
If you select Auto, the machine changes the interface to USB or
Network depending on which interface is receiving data.
Set the time-out period for the auto interface selection.
Increase or decrease the input buffer capacity.
Delete the registered Macro data.
Delete the registered Font data.
Restore the Macro and Font data of your machine to the default
settings.
Description
Choose the emulation mode.
>
Settings and Features
286
Advertisement
Table of Contents
