View Kdm Details; Cleanup (Kdms) - Sony Screen Management System User Manual

On the rear of the SRX-R320
projector, below the power switch and
RS-232C connector, there is a USB
port labeled INGESTPORT. You can
plug a USB 2.0 Drive into this
connector and it will appear as a folder
in the INGEST KDM list.
From the INGEST KDM pane you can
copy the KDM from its storage
location into the Media Block RAID
Storage. In addition, you can view the
details of the selected KDM.
Selected KDM
Details
A USB drive has a folder structure that may contain other
folders or a number of files. Once the USB drive is plugged
in to the Ingest Port, it will appear as a folder in the
INGEST KDM list. The target KDM appears as a file and
can be found in one of the folders on the USB drive.
Alternatively, the KDM file may be located in one of the
folders which have been defined using the SMS Controller
based on fixed locations. To locate the target KDM, tap
Scroll Up or Scroll Down
desired top level folder and then tap the folder view its
contents. Again, Scroll Up or Scroll Down to locate the
target KDM, tap to select the KDM and then tap Ingest to
begin the ingest process. Since a KDM is usually quite
small, the ingest process should finish quickly. To Ingest
all KDM contained in a folder, select the target folder and
then tap Ingest. The Ingest process is queued and Ingest
proceeds in as a background process.
Note
The folder hierarchy on the transfer media may be more
than one level deep. Continue to navigate folders until the
target KDM has been located.
Ingest Port
Cleanup Ingest
until you find the

View KDM Details

To view detail information for a specific KDM, locate the
specific KDM in the list. Tap to select the KDM and then
tap Details. The KDM DETAILS popup appears.
KDM Title
The KDM DETAILS popup contains information about
the selected KDM. In addition to the Title, the Start
Date (Time) and End Date (Time) showing the valid KDM
Date Range is shown. These dates are the first date and last
date the KDM can be used for decrypting its associated
Content (CPL). The Date and Time is shown in UTC
(GMT) as indicated by the designator "Z". The Filename
for the selected KDM is also shown.
To close the KDM DETAILS popup, tap Close

Cleanup (KDMs)

A role restricted function that allows an authorized user to
cleanup orphaned or expired KDMs. KDMs may be
orphaned when the associated DCP is moved to another
Screen Management System or if it is the practice of the
exhibitor to Ingest all KDMs into all available systems.
This function is invoked automatically, and does not
require manual operation under normal circumstances.
Close
KDM Date
Range
KDM FIlename
.
Content
37