Filter Timer Reset - Sony Screen Management System User Manual

Test Pattern (Select)
To select a test
pattern image,
tap Test
Pattern. The
TEST
PATTERN
popup appears.
The CHECKER
FLAG TEST
PATTERN is
used for
registration
adjustment. To select the TEST PATTERN, tap
CHECKER FLAG.
Additional patterns available are:
• OFF (select when process is complete)
• Gray-8 and Gray-10 (centered white block at 80%
and 100% white respectively)
• Gray-2FULL, Gray-8FULL and Gray-10FULL
(Full Screen at 20%, 80% and 100% white
respectively)
• Red1, Blue1, and Green1 (centered block)
• Crosshatch and Crosshatch Inverted
• Checkered Flag
• Flat (image sizing reference)
• CinemaScope (image sizing reference)
• Test Mode 1
Registration adjustment range is from +2pixels to -
2 pixels with an increment of adjustment of +/-1 pixel.
Test Pattern
Tap the appropriate Plus
align the Red, Green and Blue images as observed on
the auditorium screen.
Caution
Insure that Lens Focus is optimized prior to starting
the registration process. In some cases it may be
beneficial to use a white sheet of paper placed flat
against the screen so you can see the black/white
78
Theater Setup
Tap Desired
Pattern to Select
Finish
or Minus button to
transition to verify lens focus (use crosshatch pattern)
and also to make it easier to see registration errors.
When the image is properly registered, click Next. The
Registration Adjustment screen closes and you are
returned to the Menu,

Filter Timer Reset

The number of hours of operation for the projector's
optical filters can be tracked separately. This feature
allows you to monitor the number of hours on the filters
and replace them before they effect either airflow or the
quality of cooling air in the projector.
Note
In the SRX-R320 projector, the optical filter operation
hours are tracked. In the R220 projector, the optical filter
and power supply converter filter operation hours are
tracked.
Access to the Filter Timer reset feature uses the pre-
defined Theater Setup login "trsetup" thus insuring that the
Resets are carried out by only qualified personnel.
Reset
Tap Reset for the associated filter and then tap Close
to return to the Menu.