Show Listing - Sony Screen Management System User Manual

Note
Executing PLAY begins presentation of the Show from
the current position indicted in the Now Showing pane. To
begin presentation of the Show from its beginning, tap
RESTART. A confirmation message appears and then tap
YES.
RESTART Presentation
When STOP has been executed while a
presentation is in progress the RESTART
button appears. RESTART is used to begin
the presentation from the Start of the Show. RESTART
only appears when a presentation is stopped while in
progress. To begin the presentation from the Start of Show,
tap RESTART. A confirmation message appears. Tap
YES and presentation of the Show begins.
Resume presentation from a specified position
When you stop a presentation that is in progress, the Offset
button appears. If you tap the Offset button, the ENTER
REWIND TIME dialog box for specifying the resume
position appears. The position at which the presentation
was stopped after the start of the content playback is
indicated by Base Offset timecode.
To specify the offset timecode at which to resume
presentation, tap the hh (hour), mm (minute), and ss
(second) boxes, and use the Plus
buttons to enter a value for each box separately. You can
also use the Rewind Time drop-down menu to select a
specific amount of time to rewind from the Base Offset.
When you tap the Accept button, the presentation will
resume from the specified position.
Caution
Offset playback is only possible in the minus direction
during PWI presentations.
16
Shows
PAUSE Presentation
When the current show is in progress the
PAUSE control is available. The PAUSE
function halts the current presentation but
leaves the most recent frame image presented on the
screen. To pause presentation of the current Show, tap
PAUSE.
Caution
After pausing a presentation in a system for which AV
DELAY is set, wait at least 1 second before resuming
playback.
FRAME ADVANCE
When the current show has been PAUSED
the FRAME ADVANCE control is
available. FRAME ADVANCE allows you
to "adjust" which frame of the current presentation appears
on the auditorium screen.
RESUME Presentation
When the presentation has been PAUSED
the RESUME button appears. RESUME
allows you to start the presentation from the
current position.
and Minus

Show Listing

The SHOW LISTING pane displays information and
controls relating to Show Playlists (SPL) resident in the
SMS. Brief details of any of the listed SPL are available.
To view the available
Show Playlists, tap
Menu, tap Shows and
then tap Show Listing.
The SHOW LISTING
pane (illustrated below)
appears.
The primary control
available on Show
Listing is the
PLAY/STOP control. In
addition, a Details
button is available that
opens a popup
containing detailed
information about the
selected Playlist.
Tap Show Listing
Shows Menu