Ingesting Via Network; Ingesting Kdm; Ingesting From A Usb Flash Drive - Sony SRX-R515P Operating Instructions Manual

To remove the HDD
Perform the following to remove the HDD.
2
1 Press the power button.
The LED blinks for a moment and then turns off.
2 Verify that the LED is off, push the left side of the
handle, and remove the HDD.

Ingesting via Network

DCP stored on another server can be ingested via network.
Caution
To ingest DCP via network, it is necessary to register the
source device ahead of time.
For further details, refer to the "Installation Manual."
To ingest DCP, follow steps 2 to 5 in "Ingesting from HDD
via USB Connector" (page 19).
In step 3, select the source device in the [External Folder]
pane.

Ingesting KDM

1
When DCP is encrypted, it is necessary to also ingest the
KDM encryption key file to the server.
When DCP is encrypted, a key icon will be displayed on
any CPL containing DCP.
DCP can be opened in the "Library" screen.
KDM can be ingested in the following ways.
• Ingesting from a USB Flash Drive (page 21)
• Ingesting from a Network Folder (page 22)

Ingesting from a USB Flash Drive

Caution
Do not start up the server with a USB device inserted in
INGEST PORT1/2 connector on the front of the server.
The USB device may not be recognized.
1
Connect the USB flash drive containing the KDM to
the server's INGEST PORT 1/2 connector.
2
Tap the [Library] tab, and then tap [Library].
The "Library" screen will be displayed.
3
In the [External Folder] pane, select the following
terminals connected to the USB memory device, and
then tap [Open].
• When connected to INGEST PORT 1 terminal,
select [Ingest_USB_1].
• When connected to INGEST PORT 2 terminal,
select [Ingest_USB_2].
21
Key icon