Sony Screen Management System User Manual page 22

The offset of the added Command is the absolute offset
from the beginning of the Playlist and is set using the
ENTER OFFSET popup. To enter a value, tap the target,
i.e., Hours, Minutes, or Seconds, and then tap (or
touch-and-hold) either the Plus or Minus to increment the
value of the selected target. When the desired value is
reached, tap Accept. The ENTER OFFSET popup closes
and the added Command appear as a Playlist Element
identified by its yellow color. The Offset value is displayed
in the first column.
When all changes are complete, tap Save. CREATE
PLAYLIST closes and you are returned to the MANAGE
SHOWS pane.
Caution
When executing a projector control command from an
SPL, wait at least 50 seconds after the projector lamp turns
on before executing the command. The command may be
ignored if you execute the command before 50 seconds.
1
Add Sub-Playlist
Note
Previously created Show Playlists are available as a Sub-
Playlist only if they do not contain a Sub-Playlist. If they
contain 3D (Stereoscopic) Content they appear in purple.
When an included Sub-Playlist is identified as a 3D
2
Playlist then the including Playlist will also be identified
as a 3D Playlist.
To add a Sub-Playlist, tap Sub-Playlist. Tap either the
Scroll Up or Scroll Down
the Playlist of interest, tap the target Sub-Playlist to select,
and then tap Add. The Sub-Playlist appears as the Playlist
Element at the end of the Playlist.
When Playlist Elements are existing you may
need to reposition the newly added Sub-
Playlist to a different position within the existing events.
To move the Sub-Playlist, in the right side list tap the Title
to select and then tap Down or Up (control illustrated to
the right) to move the selected Playlist Element one event
position in the desired direction. Continue to tap Down or
Up until the selected Playlist Element is in the desired
position in the Playlist.
When all changes are complete, tap Save. CREATE
PLAYLIST closes and you are returned to the MANAGE
SHOWS pane.
1.An existing Playlist will only appear as a Sub-Playlist if
it does not include a Playlist. The SPL may contain only
one nested Sub-Playlist level.
2.A playlist may be identified as a 3D Playlist even if it
does not actually contain 3D Content. This occurs if the
included Playlist includes a 3D Function or Command.
22
Shows
arrow until you locate
Delete Playlist Element
To delete a Playlist Element from the new Playlist, tap
either the Scroll Up or Scroll Down
side list) until you locate the Playlist Element of interest,
tap the Playlist Element to select, and then tap Delete. The
Playlist is removed from the displayed list.
Title
Delete
Playlist Elements
Intermission
Setup
When all changes are complete, tap Save. CREATE
PLAYLIST closes and you are returned to the MANAGE
SHOWS pane.
Intermission Setup
An intermission can be scheduled for a Composition
Playlist registered in a Show Playlist. Select the content
(CPL) in the Playlist, and tap the Intermission Setup
button. The Setup Intermission pane appears.
arrow (right
Properties
Close
Save Cancel