Maintenance; Projector - Sony Screen Management System User Manual

Date/Time of Events
Logged In User Messages
Log Events are ordered with the latest at the top of the list.
tap Scroll Up or Scroll Down
of interest.
Tap Refresh to insure that the latest information is
displayed.
60

Maintenance

Logged Events
Maintenance
The Maintenance menu
selection allows you to
access the following
maintenance functions
for the SMS System.
• Marriage
• Network Setup
• Time Zone
• Clock Settings
Refresh
• Closed Caption
• Owner Info
• eCNA Settings
the locate the Event
General Maintenance
operations include;
Projector specific settings, System Security information,
and Theater Network settings
Additional information may be contained in
documentation specific to the sub-system.

Projector

To access the
Maintenance - Projector
pane, tap Menu, tap
Maintenance and then
tap Projector. The
Projector Maintenance
pane appears which
allows the you to Refresh
the Projector data, select
a Test Pattern to be
shown on the screen, and
initiate the Luminance
calibration process. In
addition, the current
Lamp Information is
shown.
Note
Some projector setup and maintenance operations use the
SRX Controller
Tap Menu
Setup
Tap Projector
2
application. An example would be; Lamp
1.The Auditorium Unit has an internal network that has a
fixed configuration. The settings available on the Network
Setup pane are for Theater Network connection.
2.The SRX Controller exercises direct control over the
projector and therefore should not be used at the same time
the Projectionist Terminal or SMS Controller is in
operation.
Tap Maintenance
Maintenance Menu
1
.
Maintenance Menu