Sony Screen Management System User Manual page 25

Srx-r320 projectionist terminal
Table of Contents

Advertisement

Seconds
Minutes
Hours
Accept
The duration of the added Black (Leader) is set using the
ENTER GAP DURATION popup. This duration is an
absolute value and adjusts the start time of the following
Playlist Element in relation to the end time of the
proceeding Playlist Element. To enter a value, tap the
target, i.e., Hours, Minutes, or Seconds, and then tap (or
touch-and-hold) either the Plus or Minus to increment the
value of the selected target. When the desired value is
reached, tap Accept. The ENTER GAP DURATION
popup closes and the added Black appears in the right-
hand list at the end of existing Playlist Elements.
Position the added Black to the correct
position within the existing Playlist Elements.
To move the Black Playlist Element, in the right side list
tap the Black to select and then tap Down or Up (control
illustrated to the right) to move the Black Playlist Element
one event position in the desired direction. Continue to tap
Down or Up until the Black Playlist Element is in the
desired position in the Playlist. The start time of existing
Playlist Elements are adjusted to accommodate the
duration of the Black Playlist Element.
To add Black which is actual Content then locate the
Content and add it to the Playlist in the same manner as
you would add other Content. (See "Add Content" on page
21.)
When all changes are complete, tap Save. CREATE
PLAYLIST closes and you are returned to the MANAGE
SHOWS pane.
Note
Be sure to tap Save before leaving this screen. If you close
the screen without tapping Save, all changes will be lost.
Close
Minus
Plus
Cancel
Adjust Black (Leader) Duration
The duration of Virtual Black
timing needs. To adjust the duration of Black/Leader in the
SPL, tap either the Scroll Up
arrow until you locate the target Black (appears as green in
the Playlist), tap the Black element to select (the Edit
button appears) and then tap Edit.
Edit Playlist
Tap Black Element
The Enter Gap Duration popup appears, adjust the
Duration value, tap Accept and then tap Save.
Seconds
Minutes
Hours
Accept
Note
Be sure to tap Save before leaving this screen. If you close
the screen without tapping Save, all changes will be lost.
1.Only the duration of Manufactured Black can be
adjusted.
1
can be adjusted to meet
or Scroll Down
Edit
Save
Close
Minus
Plus
Cancel
Shows
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents